FEOA Forums banner

Wiper problem

2K views 10 replies 2 participants last post by  escortlx96 
#1 ·
Hi guys, my 93 LX wipers don't move at all.
I changed wiper motor yesterday, didn't work.
I tested the two connectors to the wiper motor. No matter the switch on or off, the readings don't change. On the black one, I got 14.7V, 12.8V and ground. On the white one, I got almost nothing. like 0.1 and 0.4v.
What could be wrong?
Thanks.
 
#8 ·
Okay.......... I found the relays. But which one is wiper relay?.........
I pulled out a white one, Imasen H270, which has 4 pins and a yellow one, Imasen BW0G, which has 5 pins.
I didn't get any info out of Imasen website.
I have both Chilton's and Haynes, but they don't have much info on relays.
Please Help!!!!
 
#10 ·
I found them above the fuse box on the driver side. There are 5 of them.
According to Haynes, it should be one of the two I pulled out. Chilton's manual doesn't say much about relay.
Where is your multifunction switch? 96 and 93 are basically identical, right?
Thanks.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top