FEOA Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
8,425 Posts
It's mainly only a problem to worry about if you're over heating the motor. As long as it does'nt over heat it will go and go.
The head is aluminum and the valve seat it some other kind of metal, so they exspand differently when the motor is over heated, so they can either just fall out or break into peices.

Swapping to a 1.8 is way too much work just so you dont have to worry about dropping a valve seat.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top