FEOA Forums banner
1 - 9 of 9 Posts

· Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
:eek: Look at what i picked up for $200!...been awhile since ive been on here month or so...still have the 98 lx but its just sitting...probably scrapping or parting it out..in need of a new tranny i cant afford....now as for the GT which is an easy fix and definatly interest me more!...needs head gasket replaced interior cleaned alot,new front bumper and a few dings taken out/new panels either way, and possibly a new shifter but it does run and drive! :D....Checking for corrosion/warpage of head n block also just to be on the safe side im out of town as of tomorrow-sunday so i probably wont be checking much until then!...here are a few pics, ive been tearing into it since then.....took off exhaust manifold water poured out of the ports :(.....but no worries im here to rescue her! :D...thanks for looking!
(Sorry for the blurry pics)

"Rusty"













 

· Registered
Joined
·
2,538 Posts
Yiiiikees, that's quite the project. Hopefully it works out well for you. If it needs a head gasket, check out the rod bearings and make sure the crank is still good.
 

· Registered
Joined
·
333 Posts
gt goodies.............. for freeeee (= hahaha naw ive been wanting those side skirts for forever but every time i go to buy some , my money decides it needs to be elsewhere )= so yeah.......... good job scoring a gt though!!!
 

· Registered
Joined
·
45 Posts
Discussion Starter · #7 ·
truth90 said:
gt goodies.............. for freeeee (= hahaha naw ive been wanting those side skirts for forever but every time i go to buy some , my money decides it needs to be elsewhere )= so yeah.......... good job scoring a gt though!!!
:p ah i see...im on the hunt currently for a new front bumper but no luck so far :ninja:
 

· Registered
Joined
·
45 Posts
Discussion Starter · #9 ·
**UPDATE**

Well back at work on the escort after a loooong thanksgiving..hope everyone had a good one at that!...i sure did! :eek: ...now as for the escort, ripped into it some more...not much daylight between getting up at 5am and getting home 1hr before dark :p....so heres what i have done...pretty much just disconnected a few things here and there and took the valve cover off to see what im working with everything looks great so far...here is a pic you tell me...? asforuwho dont know im just replacing the head gasket...so should i take the intake off or leave it bolted?...im having issues...fuel rail...intake etc etc...what should i do?...thanks for the help!

 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top