FEOA Forums banner
1 - 1 of 17 Posts

· Registered
2,327 Posts
my 94 EGT did that. what a buddy of mine did is. he found 2 nuts the same size along with 2 bolts. took a piece of steel and drilled 2 holes into it. welded the nuts to it. reamed the holes in the rad support to allow these new nuts, then welded the plate to the rad support, then bolted it back up as you normally would. if i had a camera i would show you. here's the story of MY catastrophy

http://www.feoa.net/modules.php?name=Fo ... ic&t=64310
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.