FEOA Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
374 Posts

·
Registered
Joined
·
374 Posts
If you swap the master cylinder, you might consider getting a brake line wrench to remove the hydraulic tube on the bottom of the master cylinder. Mine was stuck on there pretty good and my conventional wrench rounded it off. I ended up using a pair of vice grips to break it loose and put it back on. It's all mutilated now but it works.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top