Joined
·
493 Posts
clean the area, put a little bit WD40 around the vss housing and wait for a minutes.
DON´T PULL the VSS just turn CC and CCW and pull slowly, sometimes the VSS are a little bit stuck so with these movements in going out very ease, protect the hole of the trannny from dust.
Check the o´ring that seal the VSS to the tranny
best regards
DON´T PULL the VSS just turn CC and CCW and pull slowly, sometimes the VSS are a little bit stuck so with these movements in going out very ease, protect the hole of the trannny from dust.
Check the o´ring that seal the VSS to the tranny
best regards
