FEOA Forums banner
1 - 20 of 32 Posts

· Registered
Joined
·
1,291 Posts
Well my next three things:

1. Finish turbo project

2. New suspension

3. Yokohama Parada Spec2 215/40´s

-------------------------------------------------

4. "Supra Scort" front bumper

5. MX3 Seats, all interior black and white
 

· Registered
Joined
·
376 Posts
Well as Mickey has been serving me and my family since 89.I believe I would pay to heve it completely disassembled and redone with all new everything.I would have it rebuilt as a five speed, AWD, with a ford 2.3l turbo, cast in brazil(IMPORT as defined by NHRA) with a ranger cam and nos.,the list of specs is long and expensive, but the combo should run low 10´s in the quarter or better.Bye bye to the true imports from a little americono box.
 

· Registered
Joined
·
40 Posts
1) New wheels and rubber
2) New Stereo (the stock cd is dying)
and 3) Buy an Aussie 4wd Turbo Ford Laser TX3 and ship it to Canada, then keep mine for body parts when I crash the thing in the bush from racing it off-road...

Ha Ha Ha
 

· Registered
Joined
·
910 Posts
1.Finish turbo project with the best of the best parts and complete engine build up for a lot of boost

2.Convert to either rear or four wheel drive (I would make the decision if I actually had the oppurtunity)

3.And lastly...paint and rims
 

· Registered
Joined
·
10,607 Posts
1. Engine Swap w/ turbo (and all the necessary things for that, fuel stuff, etc.....)
2. Full body Kit with Paintjob
3. AIR BAGS!!!
 

· Registered
Joined
·
796 Posts
3 things....

1)KLZE 2.5 V6 Turbo
2)Body Kit
3)Sound System
 

· Registered
Joined
·
1,883 Posts


Wow, this one sure got resurrected. Looking back I'd probably change my choices now...

1- continued suspension mods (already have eibach/tokico)
2- finish interior mods (paint, new guages)
3- exterior mods; clear corners and maybe a WRX STi rally-style wing

Don't really need much else at the moment.
 
1 - 20 of 32 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top