FEOA Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,719 Posts
You'll mess up your amp if you run it either way you have it shown there. Your only option is to run one set of wires from the amp to the middle sub, and then "jumper" wire running to the other two. I really don't know what ohm that will put you at, but you don't want the amp trying to do what you have drawn out.
 

·
Registered
Joined
·
2,719 Posts
Run the amp bridged. Run the wires off the amp to the middle sub. Then run one set of wires from the middle sub, to the left sub, and the same with the right sub, feed them off the middle sub.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top