FEOA Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Just wondering if this seems plausable or if i should scratch out and drop one Sub.

Currently i have:

3 x DIAMOND CAR AUDIO D610D2 SPEAKER 10" SUBs

Sub specs are:
Impedance: Dual 2 Ohm
RMS Power Handling: 500 Watts
Peak Power Handling: 1000 Watts

1x Rockford Fosgate T10001bd 1000 Watt Class-bd Amplifier

Amp specs are:
* 1000 Watt RMS Class BD Amplifier
* RMS Power Ratings:
o 500 watts RMS x 1 at 4 ohms
o 750 watts RMS x 1 at 2 ohms
o 1,000 watts RMS x 1 at 1 ohm

Im wondering if i could use this set up as to i currently built a box to house all 3 Subs. im wondering if my amp has enough power to put out to the Subs with out causing any damage.

Currently i havent seen a way to wire them to have the same power going to all 3 Subs. one would have to be at 2 ohm and two would be at 1 ohm. Or so it looks.

If this doesnt look like it will work i can alway just get another amp and hook one sub up seperatly or just dirtch one all together.. But figured i would see if there is a way to make this work.. Blah! haha Thanks for your time and any comments.

This is my Box i made: (first time with Fiberglass)



Thank again!
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #4 ·
Thanks for the great info guys!

I apprciate the feedback! I didnt think the examples i posted would work but thought i might throw them out there and see.

Ill take Escort94GT advise and run them in series.. actually a easier way to route the wires than my brainstorming :p

Yea i spent about $800 when i bought the amp like 4 years ago.. and only ran it with 2 subs. It for sure has the power so i figured it would run the 3.
 

·
Registered
Joined
·
74 Posts
Discussion Starter · #6 ·
silverton said:
Running them in series is basically what I said too, it's definitely going to be the safest.
Yea i know he just said it first :(

Now should i bridge them?

all 3 subs off one set of terminals?

or

all 3 subs off one + and then the - from the second terminal?

(if that doesnt make sence im good with paint :) )
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top