FEOA Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,580 Posts
The 02 sensor size is 22MM. You can buy a socket that is notched on the side specifically for the wiring of the 02 sensor or I have found that a stubby 22MM wrench usually works really well. If your sensor is a Bosch sensor the 02 socket will not fit over it because of the large body on the sensor. Be sure when you replace the sensor to put anti seize on the threads of it so if you ever need to remove it again.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top