[GlowBoy]

How can I "modify" my stock air box so I can get more air to the motor? O drive a 1993 Ford Escort LX :-Y

 

[bpletch1]

you could "try" drilling 1/2" holes in the box BEFORE the filter, but then you´ll be suckin´ in hot engine bay air

 

[GlowBoy]

I have already taken out the breather that goes behind the left turn signal :-Y

 

[James92Scort]

I don´t know exactly how the lx is set up but I took off the air silencer box and the breather tube that goes behind the turn signal on my GT. I´m going to try to find a way to cut a hole in that metal under the air box and fabricate a tube that will go down in there. meanwhile I still need to plug my silencer tube inlet.

The two good things are it´s slightly louder and I can hear my VICS, and I´m getting 21 mpg on a regular basis now. ;-)

 

[GlowBoy]

I got a shit scort for parts i will drill holes

 

[Juggernaut]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]

16-04-2003 at 18:10, James92Scort wrote:
I don´t know exactly how the lx is set up but I took off the air silencer box and the breather tube that goes behind the turn signal on my GT. I´m going to try to find a way to cut a hole in that metal under the air box and fabricate a tube that will go down in there. meanwhile I still need to plug my silencer tube inlet.

The two good things are it´s slightly louder and I can hear my VICS, and I´m getting 21 mpg on a regular basis now. ;-)

[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]

the LX sounds like it´s setup pretty much exactly the same, minus the VICS </jealousy>