FEOA Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
508 Posts
Discussion Starter · #1 ·


i took the part of the bushing with the longer side and pointed it towards the inside of the washer, there is also another washer and bushing under the a-arm
 

·
Registered
Joined
·
5,229 Posts

·
Registered
Joined
·
750 Posts
If by the longer side you mean the smaller diameter, raised area facing towards the washer, then no. The raised part is used to center the bushing in the hole in the sway bar.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top