[IFuxDemAll]

This question has probably been answered over a million times but im new, so here it is. When i change out the air bax for a cone filter and a bigger maf what do i do with the act sensor and the hose going to the valve cover? please be gentle im new to the escort, and well the whole performance world. thanks

 

[James92Scort]

If you're just putting on a Cone Filter and no MAF to TB pipe then you won't have to mess with the tube going to the valve cover.

 

[IFuxDemAll]

i figured out the tube. im going to put a breather on the valve cover. im still unsure about the sensor though

 

[Etienne]

when I had a similar setup, I drilled a whole atop my cone filter and plugged the sensor in there... after some thought I came to realize that would do it, as it used to be after the filter and before the MAF... same effect if you do what I just explained...

 

[96EscortLX]

I just got the weapon R dragon setup up (thanks to slammedbluewagon) and it had everything all ready to go. Was a nice quick and easy setup, with noticeable differences.