Holy Shift!

986 Views 3 Replies 4 Participants Last post by FourDiceS, Mar 13, 2003

BigRedMachine

Discussion Starter · Mar 12, 2003

I just replaced all the bushings on my shift lever, and man, that was the best 63 bucks i´ve ever spent. Except for that time at the rippers, but ... well never mind. Every shift is perfect, no play in any gear.

So the point of this story.
I don´t know. If you guys have any play in your shifter, replace your bushings, its an easy job and the results are great.

Save

1 - 4 of 4 Posts

Zeemax

· #2 · Mar 12, 2003

Hey, that´s cool. Did you buy an upgrade kit or just replace using stock bushings?

Save

James92Scort

· #3 · Mar 13, 2003

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]

12-03-2003 at 10:22, BigRedMachine wrote:
I just replaced all the bushings on my shift lever, and man, that was the best 63 bucks i´ve ever spent. Except for that time at the rippers, but ... well never mind. Every shift is perfect, no play in any gear.

So the point of this story.
I don´t know. If you guys have any play in your shifter, replace your bushings, its an easy job and the results are great.

[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]

Great....NOPI cancelled my short shifter order too... then i spent that money on my subs (which crutchfield screwed up on, only sent one of my 10" subs) if i had any money left i would replace my bushings lol :-]

Save

FourDiceS

· #4 · Mar 13, 2003

Could you maybe put a how to or what it looks like because for dumb people like me it´s not going to be obvious... Thanks

Save

1 - 4 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month