FEOA Forums banner
1 - 1 of 1 Posts

· Registered
1,343 Posts
First time doing a clutch took me 5 hours working 2 hours wasting time. I replaced mine with a centerforce dual friction. Cost me about 280 bucks. I recommend replacing the throw out bearing at the same time and either a new flywheel or have it resurfaced.

Hardest part I think is the rear engine mount and the subframe, and removing the half-shafts.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.