FEOA Forums banner

Got Boost, but No Pull

1693 Views 12 Replies 7 Participants Last post by  Beaverboy
I dont know how many people are FI savvy, but it doesn´t matter, I´m up for any idea´s.

Okay so tonight I´m supposed to drive to Vegas to show my old roommate that con´d me into boosting the escort my now boosted escort

At the track last week I was having a problem with my fuel pressure demand going to high and the pump cutting out. Okay, well last night and this morning I ran into a new prob.

Now, its been running fine since returning from the track a week ago, and all of a sudden the scort will still show 5psi but the pull will be gone.

The only thing that makes sense right now is I´m blowing out the spark, so I need new plugs and to check and make sure I´m running the .038 gap I normally run.

I can hear a leak in my gas tank that I never heard before last night. I can hear pressure leaking out of the tank. Does anyone know if that can affect my fuel flow causing a super lean burn thats intermittant. Yeah, it will fall over on itself with boost, but then come right back if I keep my foot in it.

Any thoughts ?
1 - 1 of 13 Posts
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]
15-02-2003 at 04:56, TheBlade wrote:
I can hear a leak in my gas tank that I never heard before last night. I can hear pressure leaking out of the tank.
Any thoughts ?
[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]
For what it´s worth, here´s my limited understanding Blade:

I believe that air needs to be able to enter the fuel tank in order to allow fuel to leave. If the tank were a sealed system then I think the fuel supply to your engine would be shut off. As I understand it the only pressure in the fuel system is caused by the fuel pump and injectors.

As for hearing a leak in your tank that you never heard before, I cannot imagine what´s up with that, or how you could hear a leak there anyway. Sorry I´m not more help.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top