FEOA Forums banner

Engine Rebuild

1248 Views 15 Replies 8 Participants Last post by  Zeemax
I was wondering where i would get new berrings and stuff from for when i rebuild. I didnt know if there was a rebuilding kit that i could get that had all the gaskets and berrings and stuff like in it or if i have to go some other route to get all the stuff. I plan on starting my rebuild within atleast the next month so i am trying to get all the parts and stuff. Thanks for the replys.
1 - 1 of 16 Posts
Uh James, if you want to stroke it out to a 4.0 inch stroke, you need a different crank. stroke is determined by the crank. if you want a longer stroker you have to get another crank.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.