FEOA Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,580 Posts
I have a catch can on my '88 Pony, '97 LX wagon and '02 SE and will have one on the '88 GL as soon as I get time to rig it up. I just routed heater hose from the PCV valve to the catch can and from the catch can to the intake. I just use a small jar with a couple of fittings that I cut out of a piece of lamp rod, (available at Home Depot electrical department) drill a couple holes in the lid of the jar and put a nut on the inside of the lid and one on the outside of the lid to hold the threaded rod in place and attach the hoses with hose clamps.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top