FEOA Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
680 Posts
You have alternator noise coming thru.If you wired them thru the amp you need to make sure you run them oposite sides than the power wires and that you have a good clean ground for the amp.You also want to make sure that you wired the speakers and power cables correctly from the stock harness to the new deck.If they arent wired right or you bunched a few of them you would get the popping sound.If the decks internal signal booster isnt working you wouldnt hear the popping.It would also be a good idea to use a inline noise filter.Could be bought at radio shack for 15 bucks.Here is a website is all wiring diagrams for all cars.

http://www.the12volt.com

They have great info on all car audio and security systems.
 
1 - 1 of 1 Posts
Top