FEOA Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Haynes auto repair manual states that if the fuel pump cuts off that one of the causes would be the ECM. In addition to this, no spark is being made by the plugs. I caved in and decided to purchase a code reader to make it easier. However, the code reader is not picking up any codes. Since the codes are not being sent, would the problem lie with the ECM or another area?
 

· Super Moderator
Joined
·
5,985 Posts
could be the computer is bad, could be a bad ground somewhere too.
 

· Registered
Joined
·
6,057 Posts
usually it's the pump itselfs that cuts out. if u don't here any humming from the pump when u turn on the ignition switch, make sure there's clicks comin from the ecu area which would be ur main relay switch. also, make sure the inertia switch is down. if it's not down u'll see the light on ur dash that says fuel cut out switch.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top