FEOA Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
838 Posts
code 32 = Driver Side Air Bag/Safing Sensor Circuit - High Resistance or Open

Which translate into loose conection or faulty airbag, or safing sensor. in either case your airbag will not deploy if you are in a crash with this condition. The syten must trip two sensors before the airbags deploy. The sfing sensor provides the + power to the airbags. on some occasions hard braking is enough to set off the safing sensor. the bags won't deploy though unless the crash sensor is also activated providing a ground to the airbag and thus deploying it. It takes conciderably more force to trip a crash sensor. Something around a head on impact into an imovable object at speeds around 20-25mph or higher.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top