FEOA Forums banner

Air/Fuel mixture problem.

1171 Views 11 Replies 9 Participants Last post by  marclar
I´m started to having this problem since my intake was installed. Or hmmm maybe even before that. When I test my computer it showes that O2 says that mixture is lean.
While it´s idleing it´s producing water that dripping from my exost. While I´m driving everything is fine first 15 minutes (after computer codes were reseted) After that car starts to missfire in 2000-3000 rpm range. I can really feel it when I´m driving on 5th gear. After about hour of driving car starts being realy rough and it feels like I´m missing power. After the driving there is a black powder on my x-ost tip and little bit on the bumper meaning that I was running rich. Car has custom cold-ram air intake. swaped 3.8 TB ported polished and matched intake manifold. O2 is original and was never changed. I just wonder is it could be a O2 problem or I need new set of performance injectors and preasure regulator.???
1 - 1 of 12 Posts
hey if you figure it out let me know. I´m always running really rich. My car looks ash gray from behind from the exhaust. The engine performance drops and then gets better from time to time, but I dont know how to feel it when its misfiring and stuff...but I think I´m going to check my plugs again and stuff.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top