[rotor]

Hello all you proud owners

Now the trouble:
After an alternator failure and driving the car until I drained the battery (hoping to get out of the highway), my brake lights went off, however, the third brake light is working. I checked the fuse anyway, it is OK. Light bulbs are fine, the tail lights are also working. Since is not the brake SW (the third brake light is working fine) I'm guessing that I've got to start with the wiring.

Does anyone have the brake wiring diagram?

Pretty please?
:?

 

[Bojack]

Before you screw around with a wireing diagram see if you get power to the brake light sockets first. Go get a voltmeter and use it. You probably need a helper. If the fuse hasn't blown you likely don't have a problem with the wiring.

 

[rotor]

Not sure what I did... there wasn't any power going to the light bulb on the brake side, but after screwing around pulling the wires it started working.

Tried to recreate the issue, no luck. Somewhere there is a loose wire or something, I guess I'll just wait till it happens again.

Thanks Bojack.