[James92Scort]

Hey I got a question about that wing you sold me. first off I got it painted and it looks pretty damn good to me. I´m tryin to get my old 3 piece off first, i noticed the wingnut that i had to take the side plastic panels out for, then for the long skinny piece of metal with a tiny bolt on it up towards the end of the wing, what the heck size bolt is that? 3/8s is too small and 7/16s is too freakin big. Did you take the wing off yourself or was it already off, if you did...do you remember what size bolt it is? 3/8s (or 6/16s) is too small...the next size up is too big bah! Help me pleaaaaaaaase! :-| :-[

PS. while I was in there I checked my cable for my gas cap, it´s fine...that little metal retaining clip just wasn´t popping the door open, I bent it back and now my gas door opens by the switch...a year and a half of prying it open and all I had to do was bend the clip back. :-|

 

[James92Scort]

I thought about that too...but I don´t have any open ended 10 mm wrenches that i know of...there´s a long piece of metal after the threads that extends out...i can´t get a wratchet on there if i tried. :-Y

 

[James92Scort]

I´m a moron. after i said that i went and found some metrics...it was 10 mm. thanks for the help. now i just gotta figure out why it´s off...the wing sits back an inch from where it should be. i´ll worry about it tomorrow though. ;-)

 

[James92Scort]

<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]

29-04-2003 at 21:57, siragan wrote:
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]

29-04-2003 at 20:57, James92Scort wrote:
I´m a moron.

[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]

What were you saying about how I do a good job making a fool of myself? :-D

[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]

Well it´s not like you can deny it either