FEOA Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
8,421 Posts
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]
05-05-2003 at 19:47, James92Scort wrote:
as long as it´s a 2nd gen head from a 1.9 (LX) it´ll fit. I think even the 1.9 H.O. Heads from a 1st gen GT will fit too ;-)
[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]
Nope, just stick with a 91-96 lx head, unless you want to swap the entire motor
 

·
Premium Member
Joined
·
8,421 Posts
<TABLE BORDER=0 ALIGN=CENTER WIDTH=85%>[TR][TD]Quote:

[/TD][/TR][TR][TD]
06-05-2003 at 00:39, iscorticus wrote:
I was just discussing the possibility of swapping an SPI head onto an 1.9 the other day..
they do use the same gasket... I wonder if it would work.. of course I can´t try it... not yet anyway..
[/TD][/TR][TR][TD]

[/TD][/TR][/TABLE]
I belive it might work, but I heard it would lower the C/R a lot, not good for all motor but perfect for F/I
 
1 - 2 of 2 Posts
Top