FEOA Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,296 Posts
Ok, first read the post I made here and try that.
http://www.feoa.net/modules.php?name=Forums&file=viewtopic&t=5512

I'm assuming all of those will check out. So basically you're not getting a start signal from the ignition switch to the starter, or your getting one irraticly. This means three things:

1. Bad terminal on starter solenoid, or damaged wiring between ignition switch and starter
2. Bad start circuit realy (relay marked cooling fan in engine bay fuse box, don't ask why but the start ciruit runs through the cooling fan relay)
3. Bad ignition switch

Hope that helps :wink:

Matt 8)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top