FEOA Forums banner
1 - 20 of 23 Posts

·
Premium Member
Joined
·
1,675 Posts
Discussion Starter · #1 ·
Haven't posted pics for a while and figured I would get some up so everyone could see. Let me know your opinions.

















 

·
Premium Member
Joined
·
1,675 Posts
Discussion Starter · #4 ·
95EsortSittinLo said:
Looks good..........what plans do you have for it next?
Nothing planned as of now. Tomorrow I get new tires on it though, as the current ones are totally worn out in front.

on_dnbe said:
1st- oh my got that is gorgeous!

2- what is that front bumper? i want one!

3- what kind of custom work did you do to ther back seats? its sweet!
1. Thanks!
2. It's an EVO3 from australia. Good luck finding one now :wink:.
3. The front and rear seats are both from a Mazda MX3.
 

·
Registered
Joined
·
8,915 Posts
All I have to say is...damn that is gorgeous, will you be willing to sell it to me? :wink:

I notice you have the same switch for your gauges as I do. Good job on that custom mounting, mine is just hanging there for now. Very clean interior btw. Lovely MX3 seats. How did you do your rear turn signals, can people still see them or did you move em to the taillights? (double usage) :?

Keep it up man.
 

·
Registered
Joined
·
2,188 Posts
I may have asked you this before, Mike, but does the steering wheel extend a little further from the dash than the stock one?

My stock wheel is about to drive me crazy.. too much flex and the vinyl is loose enough for me to twist about in one section. The single spoke design of the pre-airbag scort wheel isn't the best for good hand positions either.

Looks good, keep up the great work. I like the painted spoiler. Is that chrome on the passenger side B-Pillar, or did the plastic coating just flake off? Either way, it looks good in that 5th pic. :wink:
 

·
Premium Member
Joined
·
1,675 Posts
Discussion Starter · #8 ·
Thanks again guys.

James92Scort said:
How did you do your rear turn signals, can people still see them or did you move em to the taillights? (double usage) :?
I have the turn signals in the reverse light hole, and the reverse lights are under the vinyl covered upper part.

Beaverboy said:
I may have asked you this before, Mike, but does the steering wheel extend a little further from the dash than the stock one?

My stock wheel is about to drive me crazy.. too much flex and the vinyl is loose enough for me to twist about in one section. The single spoke design of the pre-airbag scort wheel isn't the best for good hand positions either.

Looks good, keep up the great work. I like the painted spoiler. Is that chrome on the passenger side B-Pillar, or did the plastic coating just flake off? Either way, it looks good in that 5th pic.
The steering wheel is almost exactly in the same spot as the stock one. It's a 13" wheel so it blocks the top of gauges unless you have lower seats like my mx3 ones. Dang it I knew someone would see the cool chrome b-pillar. Actually it used to be a california car before I bought it, so most of the black trim is deteriorated. I use mother's back-to-black on all of it to keep it looking good, but I can't do anything about the peeling b-pillar lol.
 

·
Registered
Joined
·
2,371 Posts
Mike, I have to quote Bruce Almighty here and say that the car looks
B-E-A-Utiful! I love the hatch spoiler. and this is the first time I've actually seen the MX3 Seats, they look hot! How hard were they yo install, If I could find a Donor car did you need to take out the seat brackets, I imagine so. Anyway, keep up the great work, it just keps getting better. And I feel your pain, The lady who owned my GT before me let the black on both B-pillars peel, so I'm thinking of finding someway to re-paint them or I might just take Beaverboy's advice.

-Greg
 

·
Registered
Joined
·
8,915 Posts
Beaverboy said:
I may need to take my own advice.. I've got trim problems as well. :x
Me three. I have that same problem on both sides, but the driver side is worse. I started to peel it off but I got bored. :wink:

I bought some tape to replace it then I realized that Brian (PrimerGuru) was right, I should just pull the rest of the stuff off, polish the metal and paint it black. It would last so much longer.

91 I never noticed that on your car till Beav pointed it out. :p
 

·
Premium Member
Joined
·
1,675 Posts
Discussion Starter · #16 ·
Re: Nice

Stilgar said:
That is a nice escort where did you get the hatch spoiler???
:?:
It's a solarwing2 from GTS. I got it from 2EGTS on this board. GTS is out of business now so you need to look on ebay or hope to find someplace that has one in stock.
 

·
Premium Member
Joined
·
1,675 Posts
Discussion Starter · #19 ·
93lxsleepa said:
what yr mx3 seats are those if u dont mind me askin ..........i love the way they look
I believe they are from a '92. I got them from a junkyard so I'm not positive. I do know that the earlier models (92-93 I think) had these seats and they changed to a different style in '94.
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top