FEOA Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Ok, I found an early 90s Mazda 626 GT with a 2.2L turbo. its the complete car. and I was wondering if it is possible to swap it in a 93 LX and if it is does anyone know how hard it will be. like is it a do it yourself or take it to a shop and have them do it for me.

Any projections on the HP I can get from it after re-doing all the internals and putting a bigger turbo on it and bump it to 15psi? I want to put new pistons, rods, valves etc in it so it can safely run that much boost.

Stock I believe they have 145HP and 135lbs of torque.

Turbo is small and probably puts out 5lbs of boost.

Well any info on this swap and or modifications to that engine without going over 1500 bux and still having it a daily driver would be appreciated! :)
 

· Registered
Joined
·
20 Posts
Discussion Starter · #6 ·
other options

Ok what are my other options, sticking with 4 cylinders only!
I know the 2.0 SPI will go into my LX just fine, but I want an engine that already has a turbo on it. and is over 140HP stock. Front wheel drive is a must. and I dont want to spend over 1grand for the motor and anything else for it to work.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top