FEOA Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,117 Posts
yes there are 3 temp sensor on these BP motors. there is one below the thermostat, that is your dash gauge, there is one screwed directly in the thermostat housing, that controls your cooling fan, then there is one below that it's a green plug with 2 wires the others are just 1 wire, that tells your computer how hot the engine is. your dash gauge should just be a wire clip on slide on style, fan controller will look kinda like the oxy sensor plug, and the ECU temp sensor is that green 2 wire one.

hope that helps!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top