Still here in San Antonio, Tx. My 93 EGT is still purring as my daily driver after all these 100+ degree summer days. My Escort's A/C finally going...
I'd love to see a turbo'ed Escort in San Antonio. :wink:
San Antonio, tx - Remember the Alamo! :D
With the new '93 O2 sensor in, I finally took my car out for a good drive. The check engine light never came on again. So it looks like the new...
The fan does operate.. the engine gets hot, the fan blows, turns off, then turns on again after a while. That sounds normal to me. I try to keep...
This is very interesting about the VAF you mentioned. Surprisingly before reading your response, I was looking up VAFs and found & read this FEOA...
Well, I'm not always that aggressive on the pedal, only flooring it once or twice a tank. I am using the same VAF & brakes since I bought the car...
I hope your right. I guess when I re-install the calipers to the car they should fit up only one way.
As you all suggested, I bought the '93 O2 sensor. The install was easy, direct fit, and the engine is running smooth in idle & around the block....
Quick question: I just painted my calipers & was re-assembling the sleeves & pins back in.. I forgot - which bushing (hollow pin) goes back in the...
So when I replace the O2 sensor for a '95 motor with a '93 sensor, will this change the way my '95 motor will run? Basically, I'm running my car to...
LOWETGT, that sounds very logical. Now I'm just very curious to why mulitple machanics suggested I get the '95 sensor since I now have the '95...
I bought my Escort about 4 years ago, and 1 of my rear crossmember bolt threads was missing. I've been driving it with 3 bolts ever since. I'm...
Long story short, I blew my headgasket & just replaced my '93 EGT 1.8L motor with a '95 Tracer 1.8L motor. I need to replace the O2 sensor, so since...
I'm on the N.E. side of SA, off of 1604 & Bulverde. KingDaddy, I think I've seen you once driving down Judson Rd.. :lol:
My windows are getting STUCK up at the top, too. I am now having to use a lot of effort to get it up the rest of the way, even have to "help" the...
Well since I just swapped my blown '93 1.8L to the '95 1.8L engine, shouldn't it be a good time to replace my cat & muffler? I don't know if a newer...
Take out your cat converter? I thought this part is by law required to to pass inspection or something, correct? If it is true not necessary, then...
I can't remember - what is the stock pipe size for the 1.8L? 2 1/4"? I'd like to increase mine to 2.5", however as Yoda had mentioned, I would...
Yeah, I put a cheap set of ball joints on my mine. And right away I over-tighten the cheap pinch bolt & the nut started spinning. Luckily, I was...
Separate names with a comma.