Thanks guys. I will look into other options then :eek:
Wondering if it is worth the trouble scouring the picknpull for black interior pieces or if i should just work on a manual refinish.
Ah, that makes sense :S Well, today I was able to get everything fixed up. Moved all the good wires over from the old connector to the "new" one...
In other news, pictures from the pick n pull today in Arlington, WA. Spent all morning there, grabbed a few other spares of parts (ECM for example) -...
I thought corrosion from moisture as well, but I searched the entire area and there was no other nearby evidence of moisure at all. I think what...
Sounds to me like it might be the neutral position sensor or the clutch sensor or something. Had this on my manual, the wires on the neutral sensor...
Thanks, - yea, I am headed to the pick n pull in the morning, decided I didn't want to bother temporarily bypassing it. You might have missed this...
Annnnndddd. Fuck. Took apart connector. wire was toast. Tried uncrimping and recrimping connector onto wire after cleaning up. It broke off while...
"Welp, there's yur problm right der now ya kno...." [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Thanks... long summer. I will be investigating further this weekend. Have been parked since original posts. Already ruled out... unplugged it...
Sigh... have tried everything I can think of. 3 different CCRM's just to be sure. New ECU to replace the one with burned components. Unplugged...
Found an ecu at pick and pull. Looks fine. But now still getting draw on the heater in front o2 sensor. When I leave disconnected the car pulls .011...
Anyone ever use this fleabay outfit?...
Ok figured it out. I pulled the ecu to look. sure enough... does anyone have a shot of a good ecu? I am going to find a replacement obviously, 1999...
Found wiring diagram. Ruled out ccrm with spare. Ruled out everything else besides the upstream front o2 circuit. Is it possible that when it shorted...
It stops when I pull the 10amp under dash fuse for fuel injectors. Does that feed anything other than the injectors?
Hi All. Hoping someone knows where I should be looking, I am stymied. I have my heater on my front o2 sensor drawing 4 amps without the key even in...
The nuts should be nylock nuts, they won't fall off. When I installed my poly bushings, it was VERY snug - I just had to get a few threads started on...
You don't specify front or rear, but luckily its same for both. Bolt head should be under the control arm side, threads should be at very top above...
Get a press if you don't have one. I bought a 20 ton cheapo HF press a couple years back, and while it's cheapo and clearly not ready for a full 20...
Separate names with a comma.