Yes you could use RX7 ball joints which are slightly longer but have a larger stud on them requiring knuckles that use the larger stud ball joints,...
Depends what your looking for. If you want to go turbo, the BP is the better option and you can source oem turbo stuff for a decent price if you are...
Don't quote me on this since I have never done the swap, but the mx3 control arms are longer by about 15mm each side so if you did the swap using V6...
Well calculations and rules based in books are not always facts or real world, very general guidelines maybe. Me personally as I stated before, I...
Yes correct
I recommend an oem wiring manual for the donor car and the car you took the harness from, and make sure it's a manual trans harness/ECU. Yes they are...
The reason mods like this don't usually net good results is due to the fact that no tuning can be done to the ECU to account for any benefit. I don't...
Get a the mx3 engine to ECU harness and go from there. You may need to do some wiring to match up the stuff from your fuse box or the connectors...
No pictures, but just hammer the inside edge of the fender flat with a small sledge hammer.
Your looking for a VAF not MAF and you find either a B code from an FC RX7 or a K code from an MX6 or 1st gen probe to make a K/U hybrid.
No mine is a 95 LX, but in converted it to a GT body wise and engine swap, then I rebuilt the BP and it had a ring failure, so now it's been sitting...
Welcome, funny your car is the same color as mine and we both live in phoenix
Pictures of the rear spindles/hubs you messaged me about??
Yeah I saw his post on Facebook about it, but I still want to look for one since there is always a high chance it won't work out.
Looking for a used unbroken GTS Solar wing for 91-96 Hatchbacks and I know this is a long shot, but an RMM spoiler if anyone might be willing to part...
got one locally, close thread
I have another offer for one as well, plus I may have found one locally and will let you guys know if I will still need one. As bad as your black...
Looking for an EGT 3 piece spoiler, all hardware included and nothing broken
I have 205/50-15 15x8 25 offset on my wagon and I had to roll the fenders but they fit....but it will rub on hard bumps.
I guess its a matter of perception, I didnt think they were that terrible and am actually planning to run slightly stiffer springs in the front and...
Separate names with a comma.