Well said Denison. It is crazy to be pound foolish and penny wise! Dexter. Do yourself a favor and take the piston out to at least check it over....
Looks pretty dad-gummed kewl dude! I like it! Happy motoring Dan Harriman 98 SE Orange Texas
Looks great Jake. I especially like the flat black rims. Those are awesome. One little thing though, bondo is supposed to be put on bare metal....
If you don't have an alignment rack and machine, it is almost impossible to align a car's suspension. However, that being said, you can set the...
Yup. Several ways to do it. These are all good. Happy motoring, Dan 98 SE Orange Texas
Sounds like you have a pretty good plan for it. Hoping to see some update photos soon, Dan 98 SE Orange Texas
Glad you got it together claps. To add to what Scottscort says about replacing the outer tie rod ends, what I do is to count the number of turns that...
DTC P1132 means Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Rich - Bank No. 1 Apparently the engine is not getting warm...
2scorts; I just called O'Reilly's and got you some realistic prices. I used 1994 with a 1.9L as the model year as you said you had R12. The ACC is...
Wow, you get 30 MPG and you're complaining??? I get about 25 - 27 on mine and I think it is excellent mileage. 8) Dan Harriman 98 SE
I have had my 98 SE for about 4 years now. There is about 180K miles on the original engine, and it hasn't shown any signs of wearing out yet. I...
Ben; The best way to know what size your rotors are is to measure them. Take a tape measure and measure the diameter, outside rotor edge to...
Probably just a lifter that loses it's prime when oil pressure is gone or low, IE: shut off the engine, or at idle. If the ticking goes away once...
You probably have an intake manifold leak. It probably wasn't that the wd40 sprayed on the alternator made the engine speed change, but some over...
Hello all; I have a 1998 SE with a SOHC engine. The computer was replaced several years ago, before I aquired it, and the service engine soon...
"I personally am stuck between 2 possibilities. EGR and O2. I should also mention now that not once since the above mentioned repairs has the SES...
I can't answer all your concerns, but as for the IAT should be mounted in a welded nut for stability. Also, if you cap off the breather at teh...
If it were me, and it isn't, I would take the whole roof. You need a hacksaw with several blades to cut the pillars. You only have to cut the 6...
Yeah, that was what I was thinking. Seems just a bit too much work for what I would get out of it. LOL. Just thought it would look neat with the ZX...
I would like to know that too. I have looked at both, and although the fenders on the ZX don't have the crease that the LX or SE has, I think it...
Separate names with a comma.